Battery grass trimmer
ATR 20 Li Kit
A 20V, Li-Ion-powered cordless grass-trimmer weighing just 2.1kg and equipped with a single-line auto-feed cutter head.
- A practical and convenient way to keep your garden or allotment looking great!
- Single-line adjustable cutter head with handy auto-feed line advance
- Handle and telescopic shaft adjustable to suit any operator
- Plant-guide for precision trimming
- Battery and charger included and compatible with all Alpina 20V machines
Battery grass trimmer
ATR 20 Li Kit
Often purchased together
Employs the latest Li-Ion battery technology – no maintenance, no cable, no fumes and no fuss
Telescopic shaft ensures gardeners of any height can work in comfort
Built-in guide enables safe and accurate trimming around obstacles
Cutter-head can be adjusted to suit the particular task in hand
Perfectly positioned battery optimises weight distribution for low-effort manoeuvrability
Intelligent electronics – performance is maintained as the battery drains
Description
The cordless Alpina ATR 20 Li Kit offers petrol-matching power-levels and excels in terms of performance, ergonomics and ease of use!
Its high-specification 20V lithium-ion battery – which can be used across the 20V cordless range – offers speedy charge-times, extended run-times and superior longevity. You’ll also get far less noise and vibration than you would from a petrol engine; and, of course, there are no nasty fumes and no stressful starting problems!
Hard to beat when it comes to user-comfort and manoeuvrability, the ATR 20 Li Kit weighs only 2.1kg (net) and combines a telescopically adjustable shaft with a soft-grip main handle, a fully adjustable auxiliary handle and balance-optimising battery positioning.
A fold-down guide means you’ll be able to trim safely and accurately around and between plants; while an adjustable cutter-head provides the perfect angle of attack for every situation.
Thanks to intelligent electronics, the ATR 20 Li Kit will keep on performing at full power right to the end of the battery charge.
Charger and 2Ah battery included in the package.
Its high-specification 20V lithium-ion battery – which can be used across the 20V cordless range – offers speedy charge-times, extended run-times and superior longevity. You’ll also get far less noise and vibration than you would from a petrol engine; and, of course, there are no nasty fumes and no stressful starting problems!
Hard to beat when it comes to user-comfort and manoeuvrability, the ATR 20 Li Kit weighs only 2.1kg (net) and combines a telescopically adjustable shaft with a soft-grip main handle, a fully adjustable auxiliary handle and balance-optimising battery positioning.
A fold-down guide means you’ll be able to trim safely and accurately around and between plants; while an adjustable cutter-head provides the perfect angle of attack for every situation.
Thanks to intelligent electronics, the ATR 20 Li Kit will keep on performing at full power right to the end of the battery charge.
Charger and 2Ah battery included in the package.
Faqs
What kind of protective gear should I use?
Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Specifications
General info
EAN/UPC
8008984841093
SKU
271102104/A21
Power
Power source
Battery
Battery capacity
2 Ah
ePower
Yes
Power
0.15 kW
Voltage
20 Volt
Battery kit
Included
Motor type
With brushes
Maximum motor speed
8000 rpm
Lithium battery nominal energy
36 Wh
Working time (+/- 20%)
20 min
Cutting system
Nylon line diameter (millimeter)
1,6
Cutting width
25 cm
Cutting angle
Adjustable
Nylon head type
Automatic single line
Nylon line length
4 m
Equipment
Handle type
Loop Adjustable
Vibe Control System (VCS)
No
Shaft type
Telescopic
Shaft tube diameter
26 mm
Soft grip handle
No
Harness
No
Tools kit
Battery charger
Single standard
Battery charger output current
2 A
Battery charger plug type
Europlug (Type C)
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
92
Measured sound power level dB(A)
87.5
Measured sound pressure level at operator ear dB(A)
82.1
Vibration level front handle (m/s2)
2.87
Vibration level rear handle (m/s2)
4.98
Overall dimensions
Pack weight
3.63 kg
Product weight without battery
2.16 kg
Product length
1290 mm
Product width
300 mm
Product height
200 mm
Product weight
2.555 kg
What's in the box
B 22
C 215 S
Downloads
Battery manual Download
Charger manual Download
Trimmer lines guide Discover more
User manual Download
Related Products
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
8.2 kg
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
7.3 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
7.2 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
6.5 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.6 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.1 kg