AT2 66 QA
Petrol tractor
This 66cm ride-on mower is a four-in-one machine with a high-performing STIGA OHV engine. The four cutting-options are as follows: collection; mulching; side-discharge.
- Versatile, maneuverable and compact machine
- Can collect up to 150 L of grass clippings or be used in side-discharge mode
- 66 cm cutting deck, suitable to manage lawns up to 1200 m2
- STIGA engine ensures great efficiency and fuel-economy
- Cutting height can be adjusted to 5 different positions
- Improved driving experience with ergonomic steering wheel
Product details and specs
A compact ride-on, AT2 66 QA excels in terms of maneuverability and will prove a pleasure to drive! Supplying the rear wheels and blade with 3.6kW is an STIGA 224 cc ST 250 ES single-cylinder engine. A cast-iron cylinder-lining ensures the engine will stand-up to the rigors of heavy-duty use; while an OHV design means you’ll enjoy quiet, low-emission operation and pleasingly low fuel-costs. Offering class-leading versatility, the highly adaptable AT2 66 QA has five-position cutting-height adjustment and can be configured to either collect, mulch, or side-discharge. Mulching and Side discharge are available with optional.
Providing superior driver-comfort is an Alpina Ergonomic steering wheel and an Alpina Smart seat with lower-back support.
Providing superior driver-comfort is an Alpina Ergonomic steering wheel and an Alpina Smart seat with lower-back support.
Features
Time-saver
Capacious 150-litre collector keeps downtime to a minimum.
Mulching and Side discharge are optional
Grass-cuttings can be bagged, mulched or side-discharged.
Enjoy driving
Thanks to the ergonomic steering wheel, you will enjoy true driving pleasure.
What's in the box
AT2 66 QA
Petrol tractor- lensBattery charger
Technical specs
General info
EAN/UPC
8008984851313
SKU
2T0053404/A22
Power
Battery capacity
7 Ah
Power
3.6 kW
Power source
Petrol
Engine Brand
STIGA
Engine model
ST 250 ES Powered by STIGA
Displacement
224 cm³
Engine rotation speed
2450 rpm
Battery Voltage
12 V
Choke
Automatic
Engine cooling
Air
Fuel tank capacity
3.8 l
Suggested working area
1500 ㎡
Cutting system
Minimum uncut radius
77.5 cm
Cutting width
66 cm
Reverse mowing
Yes
Cutting height adjustment
Manual with lever
Cutting height positions
5 positions
Cutting height range
30 - 64 mm
Number of blades
1
Additional cutting method
Mulching
Blade engagement type
Manual
Drive system
Traction
Rear-wheel drive
Transmission
Number of gears
4 forward + 1 reverse
Transmission method
Lever-operated
Transmission type
Mechanical
Equipment
Collector emptying
Manual
Collector capacity
150 l
Steering wheel
Alpina ergonomic
Seat type
Alpina smart with low back support
Seat adjustment
Screws
Dashboard
No
Front wheel size
11x4.00-4
Rear wheel size
13x5.00-6
Hour meter
No
Headlights
No
Cruise control
No
Bumper
No
Washing link
Yes
Collector type
Textile
Storage compartment
Yes
Cup holder
No
Pivoting front axle
Yes
Antiscalp wheels
No
Safety system
Seat with Safety Contact Breaker
Tools kit
Mulching kit
Optional
Battery charger
Included
Trailer hitch kit
Not applicable
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
98
Max vibration on driver's seat (m/s2)
2.94
Max vibration on steering wheels (m/s2)
7.76
Measured sound power level dB(A)
98
Measured sound pressure level at operator ear dB(A)
87
Overall dimensions
Pack weight
147 kg
Product length
1830 mm
Product width
725 mm
Product height
1085 mm
Product weight
127 kg
Related Accessories
Support
What is the proper way to clean the lawn tractor after mowing the grass?
The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion.
What action should be carried out before winter storage or before storing it for a period longer than 30 days?
After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet.
What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days?
Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual.
What standard maintenance operations does the lawn mower tractor need?
Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine.
What are the cutting functions of the lawn tractor?
The riding tractor can be set up in different cutting modes: rear bag collection, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth.
What kinds of parts and accessories can the tractor mower be equipped with?
The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.
Reach Information
Information on Article 33 of REACH Regulation concerning STIGA Group products. Discover moreReach Information
AT2 66 QA
384004606/0 | BLADE ENGAGE CABLE | Lead | 7439-92-1 | ||||||||||
127604014/0 | BLADE SHAFT PULLEY | Lead | 7439-92-1 | ||||||||||
384004602/0 | GEAR SHIFT CABLE | Lead | 7439-92-1 | ||||||||||
384004609/0 | GEAR SHIFT CABLE | Lead | 7439-92-1 | ||||||||||
384004600/1 | DECK ENGAGE CABLE | Lead | 7439-92-1 | ||||||||||
118120010/0 | BATTERY FIAMM 12V 9Ah c/w CABLE 12FGH36 | Lead | 7439-92-1 | ||||||||||
Component 1 | Component description 1 | Substance/s | CAS number | Component 2 | Component description 2 | Component 3 | Component description 3 | Component 4 | Component description 4 | Component 5 | Component description 5 | Component 6 | Component description 6 |
---|