Electric brushcutter
ABR 1.0 EJ
This 1000w electric brushcutter weighs just 5.7kg and is supplied with a line head and a three-tooth blade. Shoulder-harness included.
- Perfect to cut tall grass and thick vegetation
- Environmentally-friendly electric engine, 100% green
- Splittable shaft, easy to store and transport
- Ergonomic and comfortable loop handle
- Easy to maintain, thanks to Tap&Go nylon head
- Single harness included, to enhance comfort
Electric brushcutter
ABR 1.0 EJ
Maximum working comfort
Thanks to the included single harness and ergonomic loop handle, you will be able to work in total comfort.
100% eco-friendly and silent
Powerful but energy-efficient electric motor will give you no starting- or maintenance-hassle.
Easy to store
Split shaft for space-saving transport and storage.
Description
Enjoy great versatility, low-effort handling and powerful cutting-performance with the Alpina ABR 1.0 EJ Electric Brushcutter!
That versatility is thanks to Alpina’s provision of two different cutter-heads - there’s a twin-line head that’s ideal for tidying those lawn edges and fence-lines; and a three-tooth brush-blade designed for tackling more challenging vegetation, such as tall weeds and overgrown nettle-patches.
The ABR 1.0 EJ benefits from a large-diameter drive-shaft (25mm) that works to optimize torque-transfer from the 1000w motor to your chosen cutter-head.
A two-piece splittable shaft means it will take up minimal space in the shed or garage; while Alpina’s provision of a single-shoulder harness ensures a high level of user-comfort.
That versatility is thanks to Alpina’s provision of two different cutter-heads - there’s a twin-line head that’s ideal for tidying those lawn edges and fence-lines; and a three-tooth brush-blade designed for tackling more challenging vegetation, such as tall weeds and overgrown nettle-patches.
The ABR 1.0 EJ benefits from a large-diameter drive-shaft (25mm) that works to optimize torque-transfer from the 1000w motor to your chosen cutter-head.
A two-piece splittable shaft means it will take up minimal space in the shed or garage; while Alpina’s provision of a single-shoulder harness ensures a high level of user-comfort.
Faqs
What kind of protective gear should I use?
Using this electric brush cutter requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the electric brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This brush cutter is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Specifications
General info
EAN/UPC
8008984833364
SKU
291851104/A20
Power
Power source
Electric
Power
1 kW
Motor type
With brushes
Maximum motor speed
7300 rpm
Cutting system
Nylon line diameter (millimeter)
2
Cutting width
37 cm
Cutting angle
Fixed
Nylon head type
Tap & Go dual line
Nylon line length
8 m
Blade type
3 T
Blade diameter
200 mm
Equipment
Handle type
Loop
Vibe Control System (VCS)
No
Shaft type
Straight split
Shaft tube diameter
25 mm
Soft grip handle
Yes
Plug type
Schuko (Type F)
Harness
Single
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
99
Measured sound power level dB(A)
97.1
Measured sound pressure level at operator ear dB(A)
84.6
Vibration level front handle (m/s2)
2.98
Vibration level rear handle (m/s2)
2.98
Overall dimensions
Pack weight
7.2 kg
Product length
1558 mm
Product width
400 mm
Product height
570 mm
Product weight
5.69 kg
Downloads
Trimmer lines guide Discover more
Related Products
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
8.2 kg
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
7.3 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
7.2 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
6.5 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.6 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.1 kg