ABR 32

The right machine to face overgrown grass, thanks to its 32.6cc petrol engine and loop handle, improving comfort. Maintenance is extremely easy.
  • check Perfect to cut wildly grown grass and thick vegetation, thanks to included blade
  • check Equipped with a 32,6 cc petrol engine
  • check Comfortable and ergonomic loop handle
  • check Easy start system for engine starting, even with low temperatures
  • check Tap&Go nylon head makes maintenance very easy
  • check Single harness included, to enhance comfort
With its high-capacity 32.6cc two-stroke Easy Start engine developing an impressive 0.9kW (1.2hp), the Alpina ABR 32 will enable you to take a more aggressive approach to domestic grass-trimming and brush cutting applications!
Designed with operator-comfort to the fore, the ABR 32 weighs just 8.3kg and combines an ergonomically-optimized ‘loop’ handle with a fatigue-limiting single-shoulder harness.
The ABR 32 comes with a twin-line trimmer-head and three-tooth metal blade, so you can fit the one that best suits the job-type.
Also featured is a large-diameter drive-shaft (26mm) that ensures the maximum amount of torque reaches your chosen cutter-head.
More Information
Shop OnlineNo
Short DescriptionThe right machine to face overgrown grass, thanks to its 32.6cc petrol engine and loop handle, improving comfort. Maintenance is extremely easy.
EAN/UPC8008984833395
Unique selling point 06Single harness included, to enhance comfort
Unique selling point 05Tap&Go nylon head makes maintenance very easy
Unique selling point 04Easy start system for engine starting, even with low temperatures
Unique selling point 03Comfortable and ergonomic loop handle
Unique selling point 02Equipped with a 32,6 cc petrol engine
Unique selling point 01Perfect to cut wildly grown grass and thick vegetation, thanks to included blade
Key features 1 descriptionAdvance the line by simply tapping the cutter-head on the ground!
Key features 1 titleBump-Feed Line Head
Key features 1 image/8/b/8b2a82dcdde77d459ddea7471e8988c7c3ad9683_ABR32_287220004A20_detail01.jpg
Key features 2 titleStart cutting!
Key features 2 descriptionEasy Start makes getting going fast and stress-free.
Key features 2 image/d/1/d13b5fabe2e68a88a8a2f2450dae0a7cc7b51cb0_ABR32_287220004A20_detail02.jpg
Key features 3 titleShoulder harness included
Key features 3 descriptionComfort-enhancing shoulder harness included.
Award 1 logono_selection
Award 2 logono_selection
Award 3 logono_selection
Certification CE logono_selection
Certification EAC logono_selection
FAQ 1 questionWhat kind of protective gear should I use?
FAQ 1 answerUsing this brushcutter petrol requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
FAQ 2 questionWhat kind of maintenance should I carry out?
FAQ 2 answerTo ensure that the brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.<br />Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
FAQ 3 questionWhich type of grass and shrubs can you work on?
FAQ 3 answerThis petrol brush cutter is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
FAQ 4 questionHow do you adjust the length of the line?
FAQ 4 answerThis model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.<br />For further information, see the instruction manual.
FAQ 5 questionThe line no longer feeds out from the head. What might have happened?
FAQ 5 answerThe line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.<br />These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.<br />Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Power sourcePetrol 2-stroke
Power0.9 kW
Displacement32.6 cm³
Engine rotation speed11000 rpm
Maximum engine speed11000 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeManual with automatic return
Fuel tank capacity0.8 l
Carburettor typeButterfly valve
Ignition coil typeAnalogic
Air filter typePaper
Maximum working area0.000000
Nylon line diameter (millimeter)2,4
Cutting width43 cm
Nylon head typeTap & Go dual line
Nylon line length4 m
Blade type3 T
Blade diameter255 mm
Handle typeLoop
Vibe Control System (VCS)Yes
Shaft typeStraight
Shaft tube diameter26 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessSingle
Included tools kitSpark plug key, screwdriver
Vibration level front handle (m/s2)5.26
Measured sound power level dB(A)112.6
Vibration level rear handle (m/s2)6.6
Guaranteed sound power level (LwA) - dB(A)114
Measured sound pressure level at operator ear dB(A)98.5
Pack weight12.6 kg
Product weight without cutting system7.4 kg
Product length1880 mm
Product width385 mm
Product height348 mm
Product weight8.300000
What's in the boxNylon head<br />Metal blade<br />Harness<br />Plastic bottle<br />Screwdriver<br />Socket spanner
SKU287220004/A20
Write Your Own Review
You're reviewing:ABR 32

Key features

Product details and specs

With its high-capacity 32.6cc two-stroke Easy Start engine developing an impressive 0.9kW (1.2hp), the Alpina ABR 32 will enable you to take a more aggressive approach to domestic grass-trimming and brush cutting applications!
Designed with operator-comfort to the fore, the ABR 32 weighs just 8.3kg and combines an ergonomically-optimized ‘loop’ handle with a fatigue-limiting single-shoulder harness.
The ABR 32 comes with a twin-line trimmer-head and three-tooth metal blade, so you can fit the one that best suits the job-type.
Also featured is a large-diameter drive-shaft (26mm) that ensures the maximum amount of torque reaches your chosen cutter-head.

Bump-Feed Line Head

Advance the line by simply tapping the cutter-head on the ground!

Start cutting!

Easy Start makes getting going fast and stress-free.

Technical specs

General info
EAN/UPC8008984833395
SKU287220004/A20
Cutting system
Nylon line diameter (millimeter)2,4
Cutting width43 cm
Nylon head typeTap & Go dual line
Nylon line length4 m
Blade type3 T
Blade diameter255 mm
Tools kit
Included tools kitSpark plug key, screwdriver
Overall dimensions
Pack weight12.6 kg
Product weight without cutting system7.4 kg
Product length1880 mm
Product width385 mm
Product height348 mm
Product weight8.3 kg
Power
Power sourcePetrol 2-stroke
Power0.9 kW
Displacement32.6 cm³
Engine rotation speed11000 rpm
Maximum engine speed11000 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeManual with automatic return
Fuel tank capacity0.8 l
Carburettor typeButterfly valve
Ignition coil typeAnalogic
Air filter typePaper
Maximum working area0 ㎡
Equipment
Handle typeLoop
Vibe Control System (VCS)Yes
Shaft typeStraight
Shaft tube diameter26 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessSingle
Vibration and noise data
Vibration level front handle (m/s2)5.26
Measured sound power level dB(A)112.6
Vibration level rear handle (m/s2)6.6
Guaranteed sound power level (LwA) - dB(A)114
Measured sound pressure level at operator ear dB(A)98.5

What's in the box

What's in the box

  • Nylon head

  • Metal blade

  • Harness

  • Plastic bottle

  • Screwdriver

  • Socket spanner

Support

Support

  • What kind of protective gear should I use?

    Using this brushcutter petrol requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.

    Which type of grass and shrubs can you work on?

    This petrol brush cutter is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.

    The line no longer feeds out from the head. What might have happened?

    The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
    These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
    Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.

    What kind of maintenance should I carry out?

    To ensure that the brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
    Remember that it is important to consult the user and maintenance manual for details of each of these tasks.

    How do you adjust the length of the line?

    This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
    For further information, see the instruction manual.

Compatible Products

Related Accessories

  1. 2 STROKE 0,1 LT
    2 STROKE 0,1 LT
    2-stroke oil in 0.1-litre bottle.
  2. 2 STROKE 1 LT (DOZER)
    2 STROKE 1 LT (DOZER)
    2-stroke oil in 1-litre bottle with dispenser.
  3. 2 STROKE 1 LT UA
    2 STROKE 1 LT UA
    2-stroke oil in 1-litre bottle.
Garden Size Measurement
Draw the area of your lawn on the map and find the most suitable products.
Zoom in on your property. Click or tap to draw a path around your garden to measure the area.

CookieBot