AMT 26 - 5 in 1
Petrol multitool
A versatile and efficient tool, to face different tasks in the garden: equipped with a pruning attachment, a hedge cutter and a grass trimmer, you will be able to manage it all!
- The perfect partner to manage any small task in your garden
- Includes pruner and hedger attachment, brushcutter shaft, nylon head and 3T blade
- Equipped with a 25,4 cc petrol engine
- Easy start system to start engine even with low outside temperatures
- Easy maintenance, thanks to Tap&Go nylon head
- Single harness included, to enhance comfort
Product details and specs
Alpina AMT 26 - 5 in 1 Multi-tool is a really versatile and efficient tool, to face different tasks in the garden. It is equipped with a pruning attachment, a hedge cutter and a grass trimmer: there is nothing in the garden that you won't be able to do with this Multi-Tool! Single harness for enhanced comfort is included. The easy-start system will allow you to start the engine whenever you like, no matter what temperature outside.
Features
Face any challenge
Thanks to the different accessories, this tool will be your best ally for any kind of job in the garden.
Strong and sharp
The blades, both for the pruner saw and hedge trimmer, are high-quality blades, sharp and efficient.
Improved comfort for arms and shoulders
Comfort-enhancing shoulder harness included.
What's in the box
AMT 26 - 5 in 1
Petrol multitool- lensNylon head
- lensMetal blade
- lensSingle harness
- lensHedge cutter attachment
- lensPruning attachment
- lensShaft extension
- lensTools kit
- lensPlastic bottle
Technical specs
General info
EAN/UPC
8008984831339
SKU
287130154/A20
Power
Power
0.7 kW
Power source
Petrol 2-stroke
Displacement
25.4 cm³
Engine rotation speed
11000 rpm
Maximum engine speed
11000 rpm
Idling speed (+/- 100)
3100 rpm
Starter
Easy start recoil
Primer
Yes
Choke
Manual
Fuel tank capacity
0.65 l
Carburettor type
Rotary valve
Ignition coil type
Analogic
Air filter type
Sponge
Cutting system
Nylon line diameter (millimeter)
2,4
Cutting width
43 cm
Cutting length
40 cm
Blade length
43 cm
Nylon head type
Tap & Go dual line
Nylon line length
4 m
Blade type
Dual action - Laser cut
Teeth distance
25 mm
Blade diameter (brushcutter)
255 mm
Blade type (brushcutter)
3 T
Blade rotation angle
180 °
Bar type
Sprocket nose
Bar length
25 cm
Bar length (inches)
10 in
Chain type
3/8" .050" (91PJ-40X)
Chain speed
5.2 m/s
Chain oil tank capacity
0.12 l
Chain oil pump
Automatic
Chain tensioning system
Front screw tensioning
Equipment
Handle type
Loop
Vibe Control System (VCS)
Yes
Shaft tube diameter
26 mm
Inner shaft diameter
8 mm
Brushcutter attachment
Yes
Lawn trimmer attachment
No
Hedger attachment
Yes
Soft grip handle
Yes
Shaft extension
70 cm
Harness
Single
Pruner attachment
Yes
Tools kit
Included tools kit
Spark plug key, screwdriver
Vibration and noise data
Brushcutter guaranteed sound power level (LwA) dB(A)
109
Hedger guaranteed sound power level (LwA) dB(A)
107
Hedger measured sound pressure level at operator ear (LpA) dB(A)
97,8
Pruner guaranteed sound power level (LwA) dB(A)
111
Pruner measured sound pressure level at operator ear (LpA) dB(A)
97,8
Overall dimensions
Pack weight
15.98 kg
Product weight (brushcutter version)
8.2 kg
Product weight (hedger version)
9.2 kg
Product weight (pruner version)
8.9 kg
Product weight (trimmer version)
8.4 kg
Product length
1890 mm
Product width
385 mm
Product height
300 mm
Product weight
7.1 kg
Related Accessories
Support
What type of maintenance should be done on the saw accessory tool?
To ensure the petrol garden multi tool is functioning correctly and to maximise its lifetime, we recommended that you clean the space behind the bar cover regularly (depending on the frequency and intensity of use), as dirt and sawdust constantly build up in these areas.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
Do the cutting blades need maintenance or sharpening?
Cutting (especially cutting hedges) leads to the accumulation of detritus and dirt between the blades. Without the necessary maintenance, this issue can reduce cutting performance.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades of the hedge cutting accessory seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
What should I do when it is not being used?
During the times when it is not being used, we recommend you empty the fuel tank, clean the cutting elements and place the petrol garden multi tool in a safe place, ensuring you protect the blade within their storage area.
Manuals
Related Products
- Battery kit included
Battery multi-tool
Telescopic handle extension length (max)
295 cm
Pruner attachment
Yes
- Battery kit included
Battery multi-tool
Hedger attachment
Yes
Pruner attachment
Yes
- Battery kit included
Battery hedge trimmer
Teeth distance
26 mm
Cutting length
50 cm
Power
0.15 kW
Write Your Own Review