Petrol grass trimmer
ATR 26 J
A 25.4cc petrol grass-trimmer with a ‘loop’ handle and a twin-line cutter-head. Weighs 8.5 kg.
- Ideal to cut wild grass and thick vegetation
- Features a 25,4 cc petrol engine
- Easy start system, to start engine even with low outside temperatures
- Comfortable and ergonomic loop handle
- Splittable shaft, easy to store and transport
- Easy maintenance, thanks to Tap&Go nylon head
Petrol grass trimmer
ATR 26 J
Often purchased together
Description
Forget about your rusty old hand-shears and put the finishing touches to your lawn and garden the fast, low-effort way with the Alpina ATR 26 J Petrol Grass-Trimmer!
The ATR 26 J has been equipped with a 25.4cc air-cooled two-stroke engine that’s rated at a substantial 0.7kW; and which features Alpina’s stress-busting Easy Start ignition system.
It utilizes a large 26mm-diameter drive-shaft, so you’ll enjoy high-torque performance; and it’s supplied with a twin-line trimmer-head with a Tap & Go mechanism that makes the job of advancing the cutting-cord fast and hassle-free.
This ‘loop’-handled model benefits from a splittable shaft that can be taken apart should space be limited in your storage area.
The ATR 26 J has been equipped with a 25.4cc air-cooled two-stroke engine that’s rated at a substantial 0.7kW; and which features Alpina’s stress-busting Easy Start ignition system.
It utilizes a large 26mm-diameter drive-shaft, so you’ll enjoy high-torque performance; and it’s supplied with a twin-line trimmer-head with a Tap & Go mechanism that makes the job of advancing the cutting-cord fast and hassle-free.
This ‘loop’-handled model benefits from a splittable shaft that can be taken apart should space be limited in your storage area.
Faqs
What kind of protective gear should I use?
Using this brushcutter petrol requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This petrol brush cutter can work on domestic lawns, small outside areas, but it is especially useful for trimming the edges, including more marginal ones, which often cannot be reached with other types of applications. It is recommended not to allow the grass to grow too high in order to avoid forcing the machine to work too intensely, which would mean excessively slow operation. As it only has a trimmer head, it cannot be used on shrubs.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Specifications
General info
EAN/UPC
8008984833371
SKU
287110104/A20
Power
Power source
Petrol 2-stroke
Power
0.7 kW
Displacement
25.4 cm³
Starter
Easy start recoil
Primer
Yes
Choke
Manual
Fuel tank capacity
0.65 l
Carburettor type
Rotary valve
Ignition coil type
Analogic
Air filter type
Sponge
Cutting system
Nylon line diameter (millimeter)
2
Cutting width
38 cm
Nylon head type
Tap & Go dual line
Nylon line length
4 m
Equipment
Handle type
Loop
Vibe Control System (VCS)
Yes
Shaft type
Curved Split
Shaft tube diameter
26 mm
Inner shaft diameter
8 mm
Soft grip handle
Yes
Harness
No
Tools kit
Included tools kit
Spark plug key, screwdriver
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
109
Measured sound power level dB(A)
106.31
Measured sound pressure level at operator ear dB(A)
88.9
Vibration level front handle (m/s2)
3.5
Vibration level rear handle (m/s2)
5.8
Overall dimensions
Pack weight
8.7 kg
Product weight without cutting system
5.7 kg
Product length
1860 mm
Product width
280 mm
Product height
430 mm
Product weight
6.5 kg
Downloads
Trimmer lines guide Discover more
Related Products
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
8.2 kg
Petrol brushcutter
Cutting width
45 cm
Power
1.47 kW
Product weight without cutting system
7.3 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
7.2 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.95 kW
Product weight without cutting system
6.5 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.6 kg
Petrol brushcutter
Cutting width
43 cm
Power
0.71 kW
Product weight without cutting system
6.1 kg