| Shop Online | No |
|---|
| Short Description | A 20V cordless hedgetrimmer featuring Li-Ion battery power and equipped with 55cm double-sided blades. Weighs just 2.2kg. |
|---|
| EAN/UPC | 8008984841116 |
|---|
| Unique selling point 04 | High-performance 150w electric motor |
|---|
| Unique selling point 05 | Battery and charger included |
|---|
| Unique selling point 03 | Expansive 55cm double-sided blades ensure a fast work-rate |
|---|
| Unique selling point 01 | Equipped with a cutting-edge 20V (2Ah) lithium-ion battery |
|---|
| Unique selling point 02 | Impressively lightweight – just 2.2kg (excluding battery) |
|---|
| Key features 1 description | Laser-cut hardened-steel blades – dual-reciprocating for a clean cut with no chewing or twisting |
|---|
| Key features 1 title | Employs the latest Li-Ion battery technology – no maintenance, no cable, no fumes and no fuss |
|---|
| Key features 1 image | /f/1/f1a8eeb2792f048b2579afb6d52709ba470c10a7_AHT20LiKit_271302104A21_detail01.jpg |
|---|
| Key features 2 title | Optimised ergonomics and ultra-lightweight design confer excellent handling and manoeuvrability |
|---|
| Key features 2 description | Two-handed safety switching prevents accidental start-up |
|---|
| Key features 2 image | /3/f/3f7763d313564ff5bdd6cefcb0a3bfd84a16abbe_AHT20LiKit_271302104A21_detail02.jpg |
|---|
| Key features 3 title | Tip-guard – trim close to hard surfaces without worrying about blade damage |
|---|
| Key features 3 description | Battery and charger included and compatible with every tool in the Alpina 20V range |
|---|
| Key features 3 image | /5/9/596e26f250b8d89a9a43a82bfc6d585d0001d9c7_AHT20LiKit_271302104A21_detail03.jpg |
|---|
| Award 1 logo | no_selection |
|---|
| Award 2 logo | no_selection |
|---|
| Award 3 logo | no_selection |
|---|
| Certification CE logo | no_selection |
|---|
| Certification EAC logo | no_selection |
|---|
| FAQ 1 question | Which type of vegetation can you work on with this battery hedge trimmer? |
|---|
| FAQ 1 answer | This hedge trimmer is an ideal tool for tackling medium-sized domestic bushes, including with those dense vegetation. |
|---|
| FAQ 2 question | What should I do when it is not being used? |
|---|
| FAQ 2 answer | During the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the battery hedge trimmer in a safe place, ensuring you protect the blade when in the storage area. |
|---|
| FAQ 3 question | Do the cutting blades need maintenance or sharpening? |
|---|
| FAQ 3 answer | Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.<br />After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.<br />Please see the user manual for more information on this point. |
|---|
| FAQ 4 question | The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do? |
|---|
| FAQ 4 answer | Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.<br />If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.<br />For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.<br />Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available. |
|---|
| Power | 0.15 kW |
|---|
| Power source | Lithium-ion battery |
|---|
| Battery capacity | 2 Ah |
|---|
| Suggested battery capacity | 2 Ah |
|---|
| ePower | Yes |
|---|
| Battery kit | Included |
|---|
| Motor type | With brushes |
|---|
| Maximum motor speed | 17000 rpm |
|---|
| Voltage | 20 V |
|---|
| Lithium battery nominal energy | 36 Wh |
|---|
| Working time (+/- 20%) | 40 min |
|---|
| Maximum working area | 0.000000 |
|---|
| Cutting length | 50 cm |
|---|
| Blade length | 55 cm |
|---|
| Blade type | Dual action |
|---|
| Blade teeth speed | 2300 spm |
|---|
| Teeth distance | 26 mm |
|---|
| Cutting capacity (diameter) | 18 mm |
|---|
| Handle type | Fix |
|---|
| Vibe Control System (VCS) | No |
|---|
| Soft grip handle | No |
|---|
| Battery charger | Single standard |
|---|
| Battery charger output current | 2 A |
|---|
| Battery charger plug type | Europlug (Type C) |
|---|
| Vibration level rear handle (m/s2) | 1.12 |
|---|
| Measured sound power level dB(A) | 85.2 |
|---|
| Measured sound pressure level at operator ear dB(A) | 75.4 |
|---|
| Vibration level front handle (m/s2) | 0.80 |
|---|
| Guaranteed sound power level (LwA) - dB(A) | 86 |
|---|
| Pack weight | 3.63 kg |
|---|
| Product weight without battery | 2.14 kg |
|---|
| Product weight | 2.535000 |
|---|
| Product length | 952 mm |
|---|
| Product width | 226 mm |
|---|
| Product height | 181 mm |
|---|
| What's in the box | Battery<br />Battery Charger |
|---|
| SKU | 271302104/A21 |
|---|
