Electric hedge trimmer
AHT 500 E
A lightweight and enivronmentally-firendly electric 50cm hedge cutter, featuring a 180° rotating handle, that allows you to work in any position, and up to 5 possible cutting settings, to avoid any stress on arms.
- 100% environmentally-friendly, electric hedge trimmer
- 50 cm double-action blade ensures a precise and efficient cut
- Handle can rotate of 180°, to allow you more flexibility in cutting
- Up to 5 possible cutting positions, to cut in any direction without tiring your arms
- Fast-cutting blade ensures great results at first cut
Electric hedge trimmer
AHT 500 E
Silent and performing
The laser-cut blades, combined with an electric engine, ensure the greatest performance with almost no noise.
100% eco-firendly
The electric engine releases no emissions and just few vibrations.
Cut as you like
Thanks to 5 possible cutting positions and 180° rotating angle on the handle, you will always be able to work comfortably.
Description
Alpina AHT 500 E is a lightweight and enivronmentally-firendly electric 50cm hedge cutter. The 180° rotating handle allows you to work in any position, so your arms won't get tired and you can work as long as you want. This machine features up to 5 possible cutting settings, to avoid any stress on arms. The fast-cutting blades ensure a perfect result, already at first cut.
Faqs
Which type of vegetation can you work on with this machine?
This hedge trimmer is an ideal tool for tackling medium-sized domestic bushes, including with those dense vegetation.
What should I do when it is not being used?
During the times when it is not being used, we recommend you clean the teeth of the cutting element and place the cordless hedge trimmer in a safe place, ensuring you protect the blade within the storage area.
Do the cutting blades need maintenance or sharpening?
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the cordless hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the cordless hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
Specifications
General info
EAN/UPC
8008984833609
SKU
256050004/A20
Power
Power source
Electric
Power
0.5 kW
Motor type
With brushes
Maximum motor speed
28000 rpm
Cutting system
Cutting length
45 cm
Blade length
50 cm
Blade type
Dual action
Blade teeth speed
1700 spm
Teeth distance
22 mm
Cutting capacity (diameter)
15 mm
Equipment
Handle type
Turnable 180° - 5 positions
Vibe Control System (VCS)
No
Soft grip handle
No
Plug type
Schuko (Type F)
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
98
Measured sound power level dB(A)
92
Measured sound pressure level at operator ear dB(A)
84
Vibration level front handle (m/s2)
2.85
Vibration level rear handle (m/s2)
2.85
Overall dimensions
Pack weight
4.3 kg
Product length
1200 mm
Product width
180 mm
Product height
220 mm
Product weight
3.05 kg
Downloads
User manual Download