ATR 600 E

Electric lawn trimmer - brushcutter

The ATR 600 E is a telescopic-shaft electric grass-trimmer that weighs just 2.8kg. Powered by a 600w motor.
  • Electric grass trimmer, ideal to cut grass on edges and around flowerbeds
  • 100% environmentally-friendly electric engine
  • Telescopic shaft makes this machine more flexible
  • Comfortable and ergonomic loop handle
  • Tap&Go nylon head makes maintenance very easy
Tax Included

Product details and specs

Keep those lawn edges and fence-lines tidy quickly, efficiently and comfortably with this powerful but ultra-lightweight electric grass-trimmer from Alpina!
Its high-performance 600w motor drives a twin-line trimmer-head with a Tap & Go system that eliminates the need to attend directly to the spool when new cutting-cord is required - just bump the head on the ground a few times and line-advance will occur automatically. The ATR 600 E is one of the lightest machines of its type in production (2.8kg), and as such will enable you to get the job done with minimal effort expended.
A large-diameter drive-shaft (26mm) works to optimize torque-transfer; while a telescopic shaft ensures comfortable operation for gardeners of any height.

Features

100% eco-friendly
Powerful but energy-efficient electric motor will give you no starting- or maintenance-hassle.
Bump and start cutting again
Advance the line by simply tapping the cutter-head on the ground!
Reach any place
Work in comfort, whatever your height.

Technical specs

General info
EAN/UPC
8008984833043
SKU
252060004/A20
Power
Power source
Electric
Power
0.6 kW
Motor type
With brushes
Maximum motor speed
11000 rpm
Cutting system
Nylon line diameter (millimeter)
1,5
Cutting width
30 cm
Cutting angle
Adjustable
Nylon head type
Tap & Go dual line
Nylon line length
3 m
Equipment
Handle type
Loop
Vibe Control System (VCS)
No
Shaft type
Telescopic
Shaft tube diameter
28 mm
Soft grip handle
No
Plug type
Schuko (Type F)
Harness
No
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
96
Measured sound power level dB(A)
93.5
Measured sound pressure level at operator ear dB(A)
79.8
Vibration level front handle (m/s2)
2.35
Vibration level rear handle (m/s2)
2.35
Overall dimensions
Pack weight
3.5 kg
Product length
1030 mm
Product width
620 mm
Product height
300 mm
Product weight
2.8 kg

Support

What kind of protective gear should I use?
Using this electric brush cutter requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the electric brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This brush cutter can work on domestic lawns, small outside areas, but it is especially useful for trimming the edges, including more marginal ones, which often cannot be reached with other types of applications. It is recommended not to allow the grass to grow too high in order to avoid forcing the machine to work too intensely, which would mean excessively slow operation. As it only has a trimmer head, it cannot be used on shrubs.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Search engine powered by ElasticSuite
Garden Size Measurement
Draw the area of your lawn on the map and find the most suitable products.
Zoom in on your property. Click or tap to draw a path around your garden to measure the area.