ATR 350 E
Electric lawn trimmer / brushcutter
A 350w electric grass-trimmer with a bump-feed line-head and a split shaft. Weighs only 2 kg.
- Electric grass trimmer, ideal to cut grass on edges and around flowerbeds
- 100% environmentally-friendly electric engine
- Split shaft, easier to transport and store
- Comfortable and easy-manageable loop handle
- Easy to maintain, thanks to Tap&Go nylon head
Product details and specs
Take a simple, low-effort approach to keeping your lawn and garden tidy with the Alpina ATR 350 E Electric Grass-Trimmer!
Its highly efficient 350w motor powers a twin-line cutter-head with a bump-feed mechanism that makes it quick and easy to renew the cutting-cord - simply tap the head on the ground and the line will automatically advance. One of the lightest strimmer in production - just 2kg - the ATR 350 E will prove comfortable to use for gardeners of any age or build. The split-shaft design of this model means it will take-up minimal space in the shed, garage or car boot.
Its highly efficient 350w motor powers a twin-line cutter-head with a bump-feed mechanism that makes it quick and easy to renew the cutting-cord - simply tap the head on the ground and the line will automatically advance. One of the lightest strimmer in production - just 2kg - the ATR 350 E will prove comfortable to use for gardeners of any age or build. The split-shaft design of this model means it will take-up minimal space in the shed, garage or car boot.
Features
Eco-friendly and silent engine
Powerful but energy-efficient electric motor will give you no starting- or maintenance-hassle.
Bump and start cutting again
Advance the line by simply tapping the cutter-head on the ground!
Easy to store
Split shaft for space-saving transport and storage.
Technical specs
General info
EAN/UPC
8008984833036
SKU
252035004/A20
Power
Power
0.35 kW
Power source
Electric
Motor type
With brushes
Maximum motor speed
11000 rpm
Cutting system
Nylon line diameter (millimeter)
1,4
Cutting width
24 cm
Cutting angle
Fixed
Nylon head type
Tap & Go dual line
Nylon line length
3 m
Equipment
Handle type
Loop
Vibe Control System (VCS)
No
Shaft type
Full plastic
Soft grip handle
No
Plug type
Schuko (Type F)
Harness
No
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
96
Measured sound power level dB(A)
95.2
Measured sound pressure level at operator ear dB(A)
85.2
Vibration level front handle (m/s2)
3.22
Vibration level rear handle (m/s2)
3.22
Overall dimensions
Pack weight
2.5 kg
Product length
976 mm
Product width
591 mm
Product height
271 mm
Product weight
2 kg
Support
What kind of protective gear should I use?
Using this electric brush cutter requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the electric brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This brush cutter can work on domestic lawns, small outside areas, but it is especially useful for trimming the edges, including more marginal ones, which often cannot be reached with other types of applications. It is recommended not to allow the grass to grow too high in order to avoid forcing the machine to work too intensely, which would mean excessively slow operation. As it only has a trimmer head, it cannot be used on shrubs.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Manuals
Write Your Own Review